The Fenice^TM FE2 range is a state of the art series of products that add motorised movement to a variety of AV equipment, as well as to flat surfaces and cabinetry such as bench-tops, podiums and shelving units. It is particularly well suited to automating the movement of flat screens.

The Fenice^TM FE2A is a slim automated column lift, capable of lifting up to 80Kgs/175lbs. The unit also has a comprehensive range of other applications, it can also lower or slide a screen sideways, in and out of cabinets, ceilings, floors, podiums or bench tops. The maximum loading varies with each application.

The Fenice^TM FE2A is the smaller sized model with a maximum extended height of 48" / 1220mm. The unit itself measures 22.5" / 570mm in height and is suitable for most flat panels up to and including those with a matching vertical height of 22.5" / 570mm. This measurement should not to be confused with the traditional diagonal method of measuring a TV screen. Screens of this vertical dimension usually equate to what is known as a 37" screen, depending on speaker mountings etc.

Always check these measurements and the measurement of any cabinet before purchasing this equipment.

The FE2A is designed to operate manually or via remote control. A memory function is also standard so that the unit can be programmed to lift a screen, or other device, to the same position each time it is used.

The Fenice range features a patented dual worm drive which makes it super smooth and quiet (45db). The unit comes complete with control box, manual switch, remote control, IR receiver and power supply.

For flat screen applications the FE2A should be used in conjunction with one of four Fenice^TM brackets. These brackets vary in size and are designed to fit the particular size (the diagonal measurement) of the screen to be articulated. Therefore a small bracket could be used to elevate a small screen when fitted to a large column and vice / versa.

Two other models, the FE2B and FE2C, with greater height and greater maximum extensions, are also available.

The Fenice^TM FE2A complies with a wide range of international certifications including CE, UL and ROHS and carries a 36 month warranty for the column and 12 months for the controller.

HINT: To convert inches to cm and vice versa use this link http://www.worldwidemetric.com/metcal.htm

Skunkworks' Fenice™ FE2A is designed for use in professional and high quality installations and allows seamless automated movement of a flat panel or projector from a cabinet, ceiling or floor.

It is used in home theatres, boardrooms, conference centres, hotels and specialist applications such as motor homes and boats, in fact wherever exceptional mobility and aesthetics are of paramount importance.

The following list outlines the most important features of this product. It is by no means exhaustive. For further information please view the Technical Drawing.

VESA Compliant		N/A
Mounting method at base		Direct to floor / base of cabinet
Max. lift speed		40mm/sec / 1.5"/sec
Unit height		570mm / 22.5"
Stroke		650mm / 25.5"
Maximum Height		1220mm / 48"
Number of segments		3
Loading		80kg / 175lbs
Colour		Black

For flat screen applications the FE2A can be used in conjunction any size screen bracket such as the FE2W, FE2W1, FE2W2 or FE2W3, dependant on the actual size of the screen to be articulated.

HINT: To convert inches to cm and vice versa use this link http://www.worldwidemetric.com/metcal.htm

 

The combination of this Technical Drawing and the Technical Specifications, are designed to give you information about the use of this product and how it may be suit your particular application. If you still require assistance please visit the Skunkworks Community section to submit your question and view popular FAQs.

Alternatively you can send an email to support@skunkworks.com.au

Technical Notes

Installation Manual

Click below to see the Fenice automated coloumn in action! The video has a host of ideas on how to incorporate this cutting edge technology into your lifestyle.

Fenice Automated Column